Tile and ceramic adhesive
_
It is a high quality mortar specifically designed to provide strength and adhesion to walls constructed by AAC bricks/panels etc. It is a unique blend of cement, graded sand and polymer blends to effect high strength and water holding properties. It ensures that the joint width is kept to a minimum thus eliminating the cause of thermal bridging associated with the use of conventional mortars.
It is considered Beast block mortar Suitable for thin joint mortar for laying/fixing of lightweight aerated concrete blocks (brick) and other similar multi construction applications.
Uses
Beast block mortar can be used in the following construction works
_
Buildings and structures that use AAC autoclave thermostone bricks
لاصق للبلاط والسيراميك – الارضيات – والجدران
Car parks and floors of high-stress residential, industrial and commercial facilities
Green Building Company
مميزات لاصق البلاط والسيراميك
_
لاصق الثيرمستون
Features
- Quick setup time
- Shrinkage, stretching and slip resistance
- عازل للحرارة – مقاوم للرطوبة -عازل للصوت
- High bond strength, 10 times higher than normal mortar
- Excellent workability to allow for longer working periods
- مقاوم للحريق – مقاوم للعفن والطفيليات والجراثيم والاملاح والكبريتات والاكسدة
- Economical Minimum application quantity, which reduces plastering and thermal caulking costs.
Increases the speed of construction, only 24 hours is required before the next stage such as plaster, paint, etc. Cost-effective because less quantity is used and waste is reduced. Better self-treatment water retention properties.
Explanation about
How to use
_
Blocks/Slabs shall be free of impurities such as dust or other small particles on the surfaces. Follow the block manufacturer's instructions for placing the blocks.
Mixing
Mixing well with the recommended amount of drinking water, using a high-speed or hand mixer, let the material stand for 5 minutes before application.
Application Tools and cleaning
_
Apply Beast block mortar to the lightweight surface using a mortar applicator or roughly notched trowel. 3 mm thick. Place the blocks to ensure a good connection. Check the level and continue with the next block. Excess material is removed with a damp sponge before installation. Clean tools and equipment using water.
Packaging and Storage
_
Beast block mortar is supplied in plastic bags of 25 kg/35 kg. Store the product in a clean, dry area protected from direct sunlight and extreme heat and cold. It should be stored as supplied, until ready for use. Pallets can be stacked twice as high with care to spare. Opened bags should be used first. Unopened bags can be stored for 12 months. Use the oldest material first.
Properties Typical
_
- Cement based, thin layer dry mortar for cellular / lightweight concrete blocks and panels, etc.
- Additives are plasticizing agents, adhesion-enhancing agent and water-retaining agents
- Inert filler, finely graded quartz filler
Please Select A Table From Setting!
Safety
The product contains cement, avoid contact with eyes and skin for a long time. For more detailed information, study the relevant Material Safety Data Sheet.
Precautions
Beast block mortar should always be applied according to the method given in this technical data sheet. GCI is not liable for any claim arising from product failure due to improper procedure or use of the product for a purpose not recommended. Please contact the company's technical team for more details about the Beast block mortar application
Transportation
The product is not considered dangerous goods during transportation.
storage
Shelf life is 12 months when stored in dry conditions at normal temperature and humidity.