Technical specifications for ordinary plaster
Packaging and Storage
_
Beast plaster is supplied in plastic bags of 25 kg./ 35 kg. Store the product in a clean, dry area protected from direct sunlight and extreme heat and cold. Opened bags should be used first. Unopened bags can be stored for 12 months. Use the oldest material first.
Properties Typical
_
A dry, thin-layer, cement-based plaster product with a fine grain gradient of 25 microns - 1.2 mm, plaster for blocks, cellular / lightweight concrete panels and other concrete surfaces.
Additives are plasticizing agents, adhesion-enhancing agents and water-retaining agents.
| density | 1.50 kg/Itr |
| Initial tensile strength | 1.8 Nmm² - 2007:JS921 |
| thermal conductivity | W/M.K 0.26 |
| compressive strength | 14.3 N/mm² with an average of 28 days |
| granular gradient | 25 microns - 1.2 mm |
| tensile strength | 6.3 N/mm² with an average of 28 days |
| maximum application time | 60 minutes at + 30 ° C |
| application temperature | +5°C to +40°C |
| Consumption | w 5 - 4 kg / m² for brickwork |
| Mixing water rate | 6.5-6 25 kg/L |
| the color | grey/white |
| Storage | 1 year |
| Packing | 35/25 kg |
| Chemical Composition | Thermal Cement | Tio2 | CAO | Ca(OH)2 | MGO | Fe2O3 | AL2O3 | SIO2 |
| Chemical Composition |
|---|
| Thermal Cement |
| SIO2 |
| AL2O3 |
| Fe2O3 |
| MGO |
| Ca(OH)2 |
| CAO |
| TIO2 |
Packing
25 liter plastic bags
Surface preparation
It must be free of impurities, oils, dust and concrete admixtures
Mixing
Mixing is done either by means of a mixer or by hand, according to the rules and according to the following
1 - Empty the bag or bags
2- Add fresh water according to the instructions on the bag (each bag is 10-12 liters) according to the nature of the climate
How to use
Thermoplastic plaster is done either by the usual manual methods or by specialized spray bales after spraying the surface with water manually.
1 – Demolition
2 - Farewell
3 - Coarse plaster from 1cm-2cm
4 - soft plaster from 0.5 cm to 1 cm
Spray machine
1 - Coarse plaster of (0.5 cm - 1 cm)
2 - soft plaster from 0.3 cm - 0.5 cm)
It is sprayed with water
Drying Time
Solid dry 48 hours
Complete dehydration 14 days
Full sclerosis 40-60 days
Product shelf life after mixing 45 minutes
For more information, the prevalence rate of calculus
(5-6) m² per bag (50) kg
Diffusion Rate
coarse plaster
5-7 m²
Per bag 25 kg/L
soft plaster
6-8 m²
Per bag 25 kg/L
Durability
(120 kg/cm²) after 45 days
Contraction and expansion rate
0.001%
Thermal Conductivity
0.178
Firefighting
250 درجةᴼ – سماكة 3 سم
Firefighting
250 درجةᴼ – سماكة 3 سم
Painting Instructions
To maintain the technical and physicochemical properties of thyroplasty, the following must be taken into account in the process of painting and brushing.
1- Do not use oil-based paints or pastes
2 – استعمال الدهانات والمعاجين المائية فقط .
Outer Shell
Safety
The product contains cement, avoid contact with eyes and skin for a long time. For more detailed information, study the relevant Material Safety Data Sheet.
Precautions
Beast plaster should always be applied according to the method given in this technical data sheet. The Company is not liable for any claim arising from non-performance of the product due to improper procedure or use of the product for a purpose not recommended. Please contact the company's technical team for more details on the application of Beast plaster
Transportation
The product is not considered dangerous goods during transportation.
storage
Shelf life is 12 months when stored in dry conditions at normal temperature and humidity.